My Fishing Buddy Kevin

Kevin on the Right and Myself on the left

 Everyone has a special friend in their lives and mine is Kevin Aiona.  We grew up together as we live right down the block from him and his family.  His mom Donna was in the same grade as my dad so we had lot's in common to begin with.  If there was anything to do with fishing, Kevin and I were inseparable.  From fishing behind Bud Tollefson's house for suckers in April to cat fishing in August, when I fished Kevin was right by my side!  The memories are so many that it's almost impossible to name them all.  Since we were about 10, we fished special places on the Buffalo River like Carp Slough, the Buffalo Bridge, the Trestle as well as Big Creek, Trout Creek, areas on the Mississippi north of Alma such as the Cut, the Wiggle Waggle and Catfish Slough.  One of our best times and an annual favorite was fishing Wilbur's in April for the northerns as they spawned in the flood waters of Big Lake.  At first we'd rent a boat from Wilbur, and row up the shoreline casting daredevils.  In the late 70's I secured an old Martin 7.5 hp outboard and we had a motor to give us the status of a couple of big shots!  I am sure that we did really well every time we fished for northerns, but admittedly it was a long time ago.  Never the less we did very well as you can see by the picture.  Kevin is about a year younger than me but he looks pretty young in this picture, I suspect this picture was about 1978, I loved wearing old army jackets and Kevin, he still looks like he was in Junior High.  I am sure he will laugh at this picture yet those were the best of times.  Kevin was my best man in my wedding and I was his. His son Ben who has appeared in the blog is my God child, quite an honor.  From the age of 10 to 25 I am sure there were a number of great pictures.  I found an old photo album and it prompted me to pay tribute to my friend, we really caught a lot of fish in the day, with minimal help other than our own knowledge.  No depth finders, GPS, heck a good rod was maybe $15.

Kevin and a nice 4 Pound Largemouth

Both Kevin and I got pretty good at fishing bass along Catfish Slough.  I had bought a boat from Paul Wichmann which was laying in one of his pastures.  I fixed it up and ended getting a 15 hp Evinrude and we were in business.  One weekend Kevin and I camped just south of the Wabasha bridge.  We would throw Moss Boss's into the pond weed along the shore, working the bait on the surface as it would leave a trail marking where you had fished.  More often the bass would explode through the pondweed to hit the plastic lure as it skipped over the weeds.  The bass we caught were 3 to 4 pounds and would leave a hole in the pond weed, leaving a clue as to the success we had.  We caught a lot of bass like the one Kevin is holding.  That weekend we got back to our campsite after dark and walked up to the tent with our flashlight.  All of a sudden we heard this sharp rattling sound and we knew exactly what that meant, a rattlesnake.  Swamp rattlesnakes were know to be in the area and we finally ran into one.  Well we found it and quickly dispatched it.  Putting it into a burlap bag we got back in the boat and headed for Slippery's on the Wabasha side of the river, just upstream from the bridge.  The legal drinking age was 19 so we decided to celebrate our adventure.  There was a guy in the bar that was interested in our now dead snake so for a couple of beers we gave it to him.  BTW Slippery's is the bar where the original Grumpy Old Men was filmed, pretty cool.  It has changed now but at the time it was the same as in the movie.  We also fished alot of walleyes in Catfish Slough.  Both Kevin and I got good at making our own standup jigs then tying fake fur on them, we hammered the walleye while we drifted with the current down the slough.  It could be the middle of July and 100 degrees out and we'd still hammer them in 5 to 7 feet of water.  It's been a while since I have fished that area but Kevin says it's all filled in now.  I guess it's tough to stop change but the river is constantly changing.  Kevin and his son Ben are still river rats and my goal this year is to try and relive the past, a pretty big task.  Maybe I'll learn a few new things.  

Anyway my intent is to not forget those that were an important part of your being.  There is a lot of guys that fit this description, Paul Wenaas, Barry Kolden, Anyway running across these old pictures brought back a lot of memories and there are a few more that will give me an excuse to elaborate on the past!

Finally Ready!

Ready to go!!

 With the nice weather we are having the ice formation has deteriorated to a slow crawl putting a lot of pressure on some of the better lakes up north like Red Lake, my usual first destination with the Salem Ice Cabin.  Last winter, our trip to Lake of the Woods proved to be difficult for moving around as my wheel stayed up when I jacked the house up.  Luckily my friend Ben had a propane torch and by heating the pivot axle it came down and we were good.  the gave enough time to get it fixed over the summer........well you know how that often goes as procrastination is one's enemy.  Having the time to fix the worst side before the October snow  yet failing to get the other side done, it was obvious that this task is too big for one guy.  My friend Bruce offered to let me pull it into his heated shop and would help me so that's what we did last Friday.  Besides breaking a tail light backing in, Mark Applen who has a house just like mine, joined in on the task of pulling the axle pivot off to clean it, grease it and put it back together.  Not that 2 of us could not have done this but it soon became obvious that the 3rd guy made it happen. With a lot of work we had the wheel assembly off in about 30 minutes, now the work began, cleaning all that hardened grease from the assembly. Having the right tools makes a huge difference as we used power brushes to clean the big stuff off, special round brushes to clean the inside, and a special saw to cut a grove from the grease zerk across the face to help channel grease to the entire length of the axle, which was the initial problem in the first place, the grease would only go one way leaving 2/3rds of the axle with no grease.  It's a heavy duty axle but the grease system is not the best.  In addition, while fixing the right side, the grease zerk fell out so I bought some replacements.  Trying to install the replacement zerk, the 1/4 inch tread just fit into the hole, in other words the factory simply drilled a smaller than the thread hole then pounded them in.  This wasn't right so it forced me to go back to the auto parts store to get the next largest threaded zerk, an 8mm x 1.0 metric.  Then to the hardware store to get a metric tap and the appropriate drill, which they didn't have. The tap needed a 7mm drill, I had something close in inches so it would have to do.  The tap was hard to get through but it worked beautifully.  At the time I didn't think about putting a second grease zerk in the middle of the axle to make sure grease gets everywhere but when we had the left side off I bought the right drill size and put in the new zerk.  Admittedly the tapping went easier now I had the right hole!  Anyway we finished the job, now just to install the new tail light lens and I am set to go!  It sure is nice to have great friends when you need them as I know it would have been difficult to do this myself.  And to send it out to get fixed would have been $500 minimum.  I can buy a lot of Crown Royal for that!!!  Thanks guys!

Milwaukee M18 grease gun.

One of the things that I make sure to do every year is to grease everything.  Adding grease to these axles can be difficult as the zerk is in an awkward place and to hold the hose and pump the gun takes a certain amount of coordination.  For this I purchased a Lock N Lube, locking grease hose tip to grab onto the xerk so your 2 hands are left to pump.  This worked OK but can prove to be a mess if it's not locked on.  Bruce had this Dewalt battery powered grease gun and it was the cat's meow!  Although most of my battery stuff is Milwaukee (must be my Wisconsin Heritage showing!) a quick search and they had one just like it for my M18 series stuff.  It's pretty good stuff as in my collection is a 1/2 inch drill, 3/8 inch impact driver, circular hand saw, brad nailer, hedge trimmer, and a hacksaw/reciprocating saw.  They all work great and it's pretty impressive the amount of time you can get off a battery.  So the grease gun comes in on Monday and of course who needs to read the instructions........right.  I pull out the plunger and lock it into place,  unscrew the cap and insert the grease cartridge.  So far so good.  The greas cartridge has a aluminum top that you pull off by the tab, got that done.  Well I could not screw the end back on.  Completely dumbfounded it sat till the morning when I called Milwaukee's techical service, of course they don't know much.  This is so frustrating as I've had grease guns forever!!  A quick call to Bruce and explained what I did, he said you have to unscrew the barrel and insert the grease tube in from the other end............DUHH.  Grease is messy to begin with but after getting reset, it works like a charm as it's supposed to, now that I have the cartridge inserted properly, it works great.  After cleaning it up it's ready to go.

So the latest situation on Red Lake is tenuous at best.  This warmer weather has slowed the ice development however the latest word is that trucks are parking on the ice along shore as well, they are allowing ATV's out to the crack that usually develops 1/2 mile out then one has to walk about 2 miles to the deeper water to find the fish.  Friends claim that last Saturday the DNR were kicking people off because they were worried there were getting to many people on the lake.  By Christmas things should be back to normal and hopefully will be getting out within the next 2 weeks.  Either way I am getting anxious to get out.