Quick Trip to Lake John

Satellite view of Lake John

Lake John is a small lake just west of Annandale, MN.  In the past 40 years it's been one of my favorite lakes to just go fishing for the afternoon.  Mark Taylor's brother in law, Tim Guzek introduced us to the lake back in the early 1980's, apparently he had a connection somewhere.  It's always been a good panfish and largemouth bass lake, they even stock walleyes however one has never graced the end of my hook.  The lake runs north and south with a long narrow bay extending from the northwest corner.  The water is fairly clear but has a lot of weeds in it these days.  Back in the mid 80's we made a cheap plywood fishing shack and pulled it out to the lake on a snowmobile trailer.  With a small wood stove it was pretty nice for a bunch of guys who couldn't afford much.  We'd light a fire then fish the evening bite with crappies our main target, and we'd always come home with a few.  In this part of Minnesota one has to have your ice shack off the lake by February 28th.   This was our second year of having the shack and not being too smart, there was a lot of snow on the ice which pushed the ice down.  The last time we fished after re-drilling the holes, the water came up over the floor by about 4 inches and subsequently froze.  Having come out the week before we had to have it off the ice to start the process of removing it, there was no way with 4 inches of frozen ice over the floor.  It was a plain untreated floor as well so the ice was very much adhered to wood.  Plan B.....go into town and get a 40# bag of water softener salt.  Returning we spread the entire bag across the floor and headed home to come out the following weekend to finish the job.  Upon returning we were pleasantly surprised the salt did exactly what we predicted, the floor was bare, not a bit of ice was on it.  The next job was to lift the house off the ice and load it on our trailer.  In our arsenal was a couple of long ice chisels as well as pry bars but to no avail, the bottom of the house was froze to the surface yet.  It was critical that we have it removed that weekend as the DNR fine was pretty hefty.  A guy walked by with a hunting rifle and suggested he could remove the house, simply shoot through the floor and the impact would crack the ice and all would be good.  Back into town to get a box of 30-06 shells.  Returning he began to shoot the bullets through the floor, all 20 of them.  It was pretty loud but seemed like a good idea as on the edges you could see the ice shatter.  With all 20 shells shot into the floor we again tried to pry the house off the ice but it still held tight.  With daylight fading fast, we decided it just wasn't worth messing with anymore and tore the shack apart, wall by wall.  We did get the floor detached from the 2 x 4's that were stuck in the ice and pried what 2 x 4's we could but I an sure we left a few reminders of our presence there, of course it was a good spot so those left over boards would be perfect for marking our spot for next year!  Our fish shack was now on layers stacked on the snowmobile trailer, we headed up the road and stopped at a friends house, he had a couple of acres.  He let us unload the heap of wood which eventually he ended up burning.  Portable shacks were just coming into play so that ended our adventure into what turned out to be our permanent ice fishing shack.  

HDS 12 Live

My neighbor Tom Olson asked me to go with him in his boat which was nice as I  didn't have to do anything.  We did catch a few bass on a wacky worm set up which was one of the original intents for going to Lake John, try for some bass.  Unfortunately it was quite windy, coming out of the west as 15 - 20 mph.  our plan was to fish the edges of the long east to west bay where the wind would push us along the shore.  Within 5 minutes there was a small bass on my line.  Maybe 13 inches, not enough to take a picture.  A few more were caught before Tom caught this really funky looking bass.  He threw it back before I had time to snap a picture so no proof of our limited success.  Drifting the north side and casting for crappies, one finally hit my jig, maybe 9 inches, good enough to keep but it would be hard to work that area well so it went back.  It was just too windy to fish comfortably so we headed back to the landing.  It was still nice to fish a lake that I had not been to since 2015. 

Last fall I traded with Bill my HDS 12 Carbon for his HDS 12 Live, a newer unit.  It has some interesting features you can use like Live Sight for looking forward for fish.  Garmin has really set the industry ablaze with it's Panoptics system which people rave about for ice fishing.  Lowrance has some catching up to do however if and when they do I will be ready.  It's still a process to get everything changed over and working as their a little changes done every time they change models as well they have software upgrades to fix issues that were missed.  It's an easy process, simply download the update to your computer then transfer it to a miniSD card, insert the card and through the menu system find the upgrade then install it.  Admittedly it's nice to have everything talking to each other and working but sometimes it would just be nice not having to worry about it, like the good old days!  Oh well.  Yesterday Bruce Wiley flew me to Siren, Wisconsin's Burnett County Airport.  There we filled the plane up with their cheaper 100 octane low lead airplane fuel, punched to code in for the main airport building where we signed out the courtesy car and headed to Burnett County Coop to have lunch, buy some of their delicious cheese, and pick up some spotted cow beer for the neighbors.  That is always a fun couple of hours for sure. This new format is going to be the death of me!!!!!!

More Like It!

First Nice smallie in the Boat

With the better part of August relegated to the garden and the higher water, the plans to fish the Mississippi River didn't materialize as much as I had planned on it.  Also the closure of Mille Lacs, we fished the river quite a bit in July however with the warm water temperatures and the expectations of a normal bite never materialized.  Last Sunday my good friend Lory Brasel was in town so we decided to try the last part of August bite on the river.  Heading out about 1:00, I grabbed the nightcrawlers from the refrigerator but one whiff and it was apparent this was going to be strictly a crankbait trip.  They might have worked for catfish but I didn't want to deal with that smell all day!  The water was up about a foot from a "Normal" flow which was not bad as the thought was the smallies would be pushed against the bank more.  The plan was the usual routine, motor up about 4 miles just past the last island before the town of Dayton, hug the north side of the river casting various crankbaits.  The water was definitely fast and dirtier than normal but still inviting enough to try our luck.  As stated in faster water the fish tend to be up close to the shore, taking advantage of  current breaks available as well the become a great ambush point for stuff coming down the river.  My bait of choice this year is a somewhat larger square bill crankbait.  I like the way they cast and tend not to get too hung up on the bottom.  Being a little heavier, it is easy to place them right at the edge of the water then crank out.  Within 5 minutes there was a nice smallie on the line.  Of course one is never ready for that first fish and by the time we got out the net the fish came by the boat, took one last leap and spit the bait out, LDR (long distance release).  The rule in the boat is if you get a good look at the fish, can identify it, it counts as one caught.  Trying to save some of the good spots for Lory, we came upon a smaller current break when Lory pulled one as he retrieved it down the break.  Again another nice smallie about the same size as mine, maybe 17 inches, got the net out but before we got the net in the water another LDR.  Never the less it was fun!  Lory had a smaller profile crankbait with a larger lip to help get the bait down.  A few minutes later he was fighting a fish again, this time it was a 13 inch walleye.  We occasionally get walleyes when casting the shore and this would have been the 3rd such as typically they are in the deeper holes, something that's on the list to learn.  Quickly he pulled it in and released it.  Next was my turn and this time we were successful in landing the fish.  Although not huge it was still a nice smallie for the river.  We were on a good pace, a fish every 15 minutes.

6 inch Smallie on a 2 inch crankbait

Sometimes it never fails to amaze me how small a fish can be verses the the size of the crankbait it hits.  Lory was casting about a 2 inch Bandit and this 6 inch smallie hits it with vengeance.  Honestly it's quite amazing and sometimes it verifies that many of these fish simply strike out of reaction.   We released this smallie but took a picture to show just how aggressive these fish can be, heck the bait is one third it's length.  Reminds we when we were fishing for ocean run stripers in Massachusetts and catching 26 inch fish using 14 inch mackerel for bait.  The fast current made for a quick trip and without any live bait we made it down by Kings Island, just across the river from Blair's house where I land the boat.  There is a small channel that surrounds the island so we decided that with the high water, we'd boat around the island, which is privately owned by Vista Outdoors, they acquired the property when they bought Federal Cartridge in Anoka.    Only about 20 feet wide and a foot and a half deep there were a few guys casting for northerns with some luck.  It is kind of interesting idling through the channel as the roar of cars from Highway 10 is present.  It's sort of a dichotomy of things, you feel you are in a remote area with civilization right in walking distance.  There are 2 duck blinds on the property and you can get a permit to hunt ducks along the river, I hear them shooting all the time.  I guess it's nice to have somewhere close where you can do these things.  

The plan is to try and get out on the river a few more times as it is really a unique experience.  The tomatoes  are really coming in and although I still have salsa from last year, it's not what I would say the best and continue to experiment with my formula.  Wednesday was salsa night and it seems as though the correct ratio of spices seems to be coming together, about time!  The real problem this year is trying to find canning supplies, jars and lids.  It's insane for sure.  I think it will be fine as I've picked up a few things here and there.  One shout out to Lynn Brasel, Lory's wife.  After our fishing adventure on Sunday we were invited over for supper.  The Brasel's provided the salmon and a special treat, fresh Chicken in the Woods mushrooms they picked on their farm near New York Mills.  For our part we provided scallops, wine, and a bag of my frozen sweet corn.  One of the results of our fabulous supper makes me want  to share Lynn's way of serving it, she cooked the corn then added butter and cream cheese.  Uffda, my new favorite way of preparing corn, and  have lot's of it as last month I made over 90 bags (about a quart), happy eating for a year!  This new format is getting better  but still am struggling a bit.  Oh well.

Try Mille Lacs One More Time

Bruce's First Deep Water Walleye

With the official policy preventing US citizens from entering Canada extended to September 21st, this all but killed any notion of making it up to Lac Seul Outpost this year, as well everyone is got something going on this summer. Bruce, Pete and I decided to try and repeat the performance from the week before on Mille Lacs and do some deep water trolling.  I know these guys have never tried this so it would be a good experience for them.  Deciding last Friday would be a good time, we hooked the boat up and met Bruce at the public landing just north of the Casino.  The weather had been stable all week with Friday being no exception.Calm conditions were nice but it was pretty hot with temperatures in the low 90's.  With 2 goals in mind, 1 was to catch fish and the other was to show Bruce some of the screen shots of fish on the depth finder as they are easily detectable in the waters deeper than 20 feet.  The strategy would be the same as last week, one planar board out with a Reef Runner while putting 2 lead core rods out each side of the back pulling #5 Shad Raps.  The nice thing about the lead core setups is it's easy to change out baits and try to establish a pattern faster.  On the way back last week we drove over both 9 Mile and 7 Mile flats and they had a lot of fish around them so it was decided to start there.  Doing a complete circle around 7 Mile produced nothing so we made a beeline and trolled across to 9 Mile Flat.  Although we marked a lot of fish, as my buddy Kevin would say....."You can't make mark soup!".  Circling 9 mile produced nothing so we headed back to 8 mile where we got 7 the week before.  As stated before, 8 Mile Flat is a H shaped flat and is the longest mid-lake structure on Mille Lacs.  It is nice trolling the outside edges as it is fairly straight north and south, with the long stretches, one can easily control the trolling direction and speed.  As around 7 and 9 mile flat we were marking a lot of fish.  Unfortunately nothing was hitting.  Probably close to 3 miles long with a couple of smaller flats off of the northwest tip, it took about 1 1/2 hours to troll the west side.  Unlike last week we arrived at the end of the flat with nothing to show.  Deciding to change colors on my lead core, I let out the 4 colors of line and continued trolling.   As we turned east it was decided to weave in between the smaller flats on our way to the northeast corner.   All of a sudden the starboard side lead core rod starts to bounce.  Grabbing the rod and giving it to Bruce, I slowed the boat down to give us some better control.  First fish in the boat, about a 23 inch walleye.  Well, at least we weren't skunked! Thinking we should change Pete's Shad Rap to a different color we set the lines and started to troll again.  Last week the hot Shad color was a Chartreuse back and a white bottom but it did nothing this trip.  The Hot Steel pattern was the winner as it does have a silver back and chartreuse bottom, go figure!  As stated before, the nice thing about the lead core is changing lures is quite easy.

Not going too far when the rod started bouncing again. Although not a huge fish, maybe 19 inches, it

The first double of the day.

was a fish never the less!  Again this was on the #5 Shad Rap.  We got the lines set again and started trolling as Pete indicated we were due for a double.  Once again the starboard line started bouncing, as I handed Bruce the rod, Pete reeled his in like always to prevent any tangles.  All of a sudden Pete announces he has a fish on as well.  Suspecting the fish hit the bait as he started to reel, we definitely got our first double!  Pete's fish wasn't very big, about 15 inches but it was nice to see some smaller year classes being caught.  In the meantime Bruce had another one about 22 inches.  With the hot temperatures we try to get the fish back in the water with minimal handling and every fish swam away healthy however Bruce's fish stayed on the surface.  Rather than just leaving it we turned around to see if we could revive it somewhat.  Approaching the fish and attempting to net it, the minute the net touched the walleye it slapped it's tail and disappeared.  We ended up with 1 more walleye for a total of 5 fish boated.  A couple of thoughts, first they say never leave biting fish.  Hindsight is 20/20 and we should have never left the north end to continue down the east side of 8 Mile.  Catching all of our fish weaving between those smaller flats should have been a clue.  Secondly unlike the week before, we never caught a fish on the planar board, whereas last week 4 of the 7 were on the planar board.  I did switch out baits to match more closely to the colors of the Shad Raps we were having success on but it just wasn't in the cards that day.

We ended up back at Bruce's cabin before having dinner at the Lonesome Pine on Bay Lake.  The prime rib was superb!  After dinner we ended up at Jerry Kiffmeyer's place and I will not elaborate how that went!  Breakfast at Ricky Shermer's before heading home, 7 hours in the hot sun, a big meal and maybe too many refreshments made for a full 2 days.  Oh well, I'd do it again.  With the water temperatures dropping and myself getting better at boat control I  might just do some sunset trolling this fall on the reefs.  I used to do this all the time before the restrictions set in on Mille Lacs.  It's also a great time for smallies on the river as I have not done very well this year, maybe hit the river this week end.  I have still not mastered this new Blogger and may have to change my format to make it easier, driving me crazy!

Back On the Big Water

Ben's First Walleye of the Day

 I won't bore you with the details however Mille Lacs Lake opened back up to walleye fishing August first after being closed for the entire month of July.  August is not one of the best months to fish walleyes on Mille Lacs but after a scorching hot July, with a moderate amount of rain in the area as well as cooler night time temperatures, the lake surface temperature  has dropped at least 8 degrees, things were going in the right direction.  After watching this video of one of my favorite YouTube guys, Tom Boley, it was titled, Mille Lacs, Part 2.  Tom is a young guide from the Hayward, Wisconsin area and has his own YouTube channel regarding fishing.  He does an excellent job of explaining the fishing scenario's on his video's and is especially interesting when it comes to going through how to use electronics to locate fish.  Tom posted this video last week and it influenced myself to get and try lead lining an long line trolling with planar boards in the deeper water off the flats on Mille Lacs.  I have been asked buy a good friend Greg Kinblom  to take him and his son Marcus back to Mille Lacs and this was a perfect time.  Although storms blew by the night before, Sunday was to be calm, partly cloudy, a perfect setup for trolling.  Unfortunately Marcus has a girlfriend who's parents were coming over for dinner on Sunday............it was a no go.  In their place was my good friend Jack Taylor and his son Ben.  I guess next time I see Marcus we'll have to go over his priorities once again!  Heading to 8 Mile Flat, the strategy was to fish just off the 25 foot break in the 32 feet of water. With barely a breeze we headed out from the landing at full throttle, full trim.  It was fun opening the boat up and still remain comfortable as we made the 6 mile run in about 15 minutes.   Everything ran exceptionally well with the exception of my live well valve, it still won't shut off the water coming into the live well on Recirculate.  More on that later.  8 Mile Flat looks like a big H facing north and south.  Starting on the west (Left) side of the bottom of the flat we positioned ourselves about 50 yards off the edge and got set up.  The first rod we rigged was a long line rod with a Reef Runner 800 deep diver.  This lure will run at 28 feet with the about 150 feet of line let out.  Ben originally wanted to use pink, not my favorite on Mille Lacs but the kid needed to learn a lesson so we put on a pink colored Reef Runner.   Using a line counter reel we let the proper amount of line then attached a Offshore Tackle planar board to the line which will carry it 20 yards to the side of the boat.  Next Jack an I rigged up a lead line setup, each has an 8'6" trolling rod with a large reel that carries 10 colors of lead line.  Lead line is simply a braided Dacron line with a lead core inside.  The line comes in a variety of diameters based on the breaking strength one is interested in.  Regardless of the size (diameter) they all have on thing in common, the line is segments of 10 yards (30 feet) long that are different colors.  For each segment or color, the line at 2.0 mph will sink 5 feet deep.  With normal lead line to fish 25 feet deep, one would let out 5 segments or colors.  On the end of the lead line is tied a fluorocarbon leader, maybe 10 - 12 pound test and I tend to make them 10 - 15 foot, so the lure has a minimal effect on how deep the lure itself will run.  With a number 5 Shad Rap it may only run a couple of feet deeper than the stated lead line depth,  and usually a walleye on the bottom will come up 4 to 5 feet and slam the lure.  In all the years fishing I would estimate that the number 5 shad rap crankbait has caught more walleyes in my boat than all other crankbaits combined.  Of course I do use them alot!  In the case of lead line my reels are loaded with Suffix brand 832, a thinner diameter line that runs 7 to 8 feet per color instead of the standard 5 foot per color.  The thinner diameter allows one to add more line to the reel and in the case of using the 832, I can get all 10 colors on my line counter reel just in case something would happen to the end of the line, which I've experienced before.  In 32 feet of water we attached our lures and set them to the proper depth.  It took a while but about after an hour of trolling Ben's planar board was acting funny.  I had him reel it in and checked the lure, nothing so telling Ben pink was not cutting it I attached one of my favorites, a brown perch pattern.  20 minutes latter Ben pull this walleye from the depths.

Fishing wasn't terribly fast.  We had a little trouble with the planar boards a those reef runners pull very

Jack's 25 inch walleye

hard and was finding it difficult to keep the back line clip in place.  Keeping slack between the main line clip near the front of the board and the back clip that is hooked to a flag system is critical as the flag acts as a strike detector and if it's down you probably have a fish.  After getting it clamped on the line we let it out and before long the flag went down, another fish.  That would be Reef Runner 2, Shad Raps 0.  We started aggressively changing colors on our Shad Raps, finally putting a Fluorescent green/white on Jack' line and before long his rod was bouncing in the rod holder.  One nice thing is my EZ Troll, kicker motor throttle control.  When we had a fish on we could dial down the speed to a crawl, this would not mess up the existing lines that were set yet allow one to fight the fish without the pull of the motor.  This fish looked like a nice walleye and once in the net it was definitely what we were looking for, a 25 incher.  Deciding that this might be a clue I changed the Shad Rap on my line from a crawfish colored pattern to a lighter colored, similar to Jack's.  The previous strategy was to use a color similar to the Reef Runner as Ben had already caught 2 nice walleyes, but I had dragged it for over an hour with little success.  Unfortunately I had a nice white/chrome shad rap on earlier but it got hung up in some weeds that were floating and the line broke.  We did go back to try and find it but were not successful unfortunately.  Well after 30 minutes of switching my rod starts to bounce in the holder, I was finally on the board.  After setting the lines and another 30 minutes of trolling Jack tied into a dandy.  The battle ensued and he finally got it up to the surface.  I estimate it was in that 27 to 18 inch range.  Putting the net in the water and asking Jack to bring it my way, a quick head shake and the hook came out.  A quick flip of it's tail and she was gone.Although it meant no picture, it's a great way to release a fish as we work hard to unhook them quickly and get them back in the water.

Finally a Walleye!

So a quick day of fishing which included 6 hours on the water, 7 walleyes to the boat, and a variety of lures tried.  Maybe not my best day of trolling but we did not come home skunked.  The lake was beautiful and with a slight breeze from the Northwest it was just about perfect.  the original plan was to go on Saturday but severe storms had moved through that area Friday night and usually fishing isn't that good after a big storm rolls through.  Apparently they had an isolated storm come across Mille Lacs Saturday night..........well that sounds like a great excuse!  Either way it was fun, especially being able to teach Ben how to run the boat, he did fine so all I had to do was to bark out some instructions and keep the lines going.

I am still having issues with this new version of blogger, it tends to drive me crazy.....I suppose it's the old adage, it's hard to teach an old dog new tricks!  Between trying to get out on the boat and the river, there are plenty of things to do.  The second crop of sweet corn is ripening this week, the tomatoes look great and it will be time to make salsa again this year.  Canada recently closed it's border until September 21st so no trip to Lac Seul this fall, a pretty big disappointment but one just has to take it in stride.  It looks like our rescheduled Leech Lake Opener on October 9th is still on so that is good.  The winning strategy there should be trolling shad raps and I am set.  My brother Steve is working on getting a new boat and I've committed to helping him remove any electronics from his current boat and reinstalling them.  One thing that has me going is seeing the posts from my good friend Keith Holtan (he is located at the left side of this post or here ) .  Gary Blinn, a guy who frequents Keith's place in Alaska but also by chance is often at Lac Seul Outposts when we are there, is pictured with a nice silver salmon.  It takes me back to those days with my brother and cousins as this is the perfect time of the year to fish Alaska as the pinks come into the rivers and it's like catching sunfish!  Those were some good times for sure.  We will see Keith this winter, maybe I'll help him with his booth at the Sport show this year, and we'll definitely have to go ice fishing again!

Mid Summer Chores

 

First Crop ready to be cut off the cob.

Although I am still trying to figure out this new format, it doesn't seem too bad this week.  The problem with being retired  and fishing is there always seems to be something going on during the weekends and everyone else is working during the week days.  With Mille Lacs opening back up to walleye fishing, and even though it is catch and release only, my goal is to get up there in the next couple of weeks to try some lead line trolling in the basin areas.  I haven't done that in years because of the various closures however this August should be a great time.  In addition to that, hopefully the Mississippi River turns on soon as we have caught some fish, it's been a slow year.  Admittedly I usually don't start fishing the river until August and this year was July, time will tell as the river is hot on my list.  So what's been going on?  My last post had a picture of my sweet corn and this week it's finally ready to go, and go it is.  The garden has 6 rows of corn, each at about 48 feet long.  The first 3 rows were planted first with the last 3 rows planted 2 weeks later.  Each row produces about 10 dozen ears of corn and as of this post, I have only dealt with the first 1 1/2 rows, meaning there is still about 15 dozen ears that have to be taken care of before the next batch ripens, meaning there will be another 30 dozen ears to attend to!  I have shared some corn with the neighbors and there is already 19 vacuum packed bags in the freezer so hopefully with the help of my friend Bill Lundeen we can hammer out the rest of the first crop, which he should be nicely rewarded with for his help!  The cucumbers are about done, maybe a few more batches and the tomatoes are just starting to turn red.  A bumper crop of peppers and the onions look fabulous, I suspect the salsa production will start up real soon.  One day I might figure out that all this gardening is simply work yet the vacuum packed frozen corn freezes well and even after a year it still tastes as fresh as the day it was picked.  It's pretty amazing.

Honey Bees at Work.

Besides dealing with the garden, the city of Dayton decided to plow up a perfectly good 2 acre park down the road and plant it with sunflowers.  Admittedly it looks good however there are about 60 cars parked up and down the streets with little regard as to who's grass their car tires are on.  It is quite a field however with the traffic I have been avoiding it.  Apparently it has gone viral on the local Dayton and Champlin community Facebook pages, people all dressed up to take pictures, families with kids, it's all good.  What it is really good for is the bees that are on the back of my property.  Years ago a friend of a friend was looking for a place close to his home where he could keep honey bees.  With the orchard and a big garden, this would be perfect and invited Bruce to utilize my land for his hives.  the bees do a fabulous job, one could actually sit in my cucumbers and listen to the chorus of bees humming all around you.  Perfect for assuring a good crop.  Well the sunflowers should really help to provide a nice yield of honey this year as the bees do not have to travel far.  Her is a picture of one of the two hives.  The bottom pick and greenish compartments are where the queen resides.  She lays her eggs to produce worker bees to make honey to survive the winter.  There is a screen between the pink section and the first blue/yellow section to prevent the queen from laying eggs into those top boxes.  The screen is too small to let the queen who is much larger than the worker bees to get through yet it allows the workers to make their way up and basically make honey in the upper sections.  Often they make so much honey that they remove a full box and replace it with an empty one that the bees fill up again.  The bees make considerably more honey than they need to survive the winter, and sadly with disease and things like mites, often the hives die out in the winter, and they have to be replaced each year.  Supposedly this year's bees are said to be of a Russian variety and more hardy to the cold as well as more disease resistant.  We'll see as I really enjoy them on the property and they are pretty low key as pollen is their only focus, not stinging people!

As stated, I am hoping our luck changes on the river this month.  Canada is closed until August 21st and nobody is optimistic that we will be able to fish Lac Seul in September of this year.  Team Walleye did move our fishing opener event out to October 9th and it seems like everyone is gearing for that date.  Being a pretty good at trolling for walleye, October is an excellent time of the year for this technique.  Some of our guys have been calling me on techniques and preferred lures for Leech in October.  Letting out too many secrets is necessarily smart but they still have to catch them!  Besides trolling is work and many of the guys aren't into it.  My brother Steve Anderson has been negotiating on a new used boat that would be a nice upgrade for him.  It's a great time to sell a boat and I promised him help with transferring his electronics and trolling motor.  I remember when he bought the one he is selling, he called and told me he was going to look at a Lund 1625.  After telling him he's crazy and to definitely go bigger he called on the way back stating I was right and he ordered the 1725.  Well this new one is a 1775, a little longer and has more space.  He just retired and my advise.....your not getting any younger!  Leech Lake and Lac Seul is where one appreciates the extra size.  Oh well, obviously there is plenty to do. 

Blogger has Changed, Let's see if this works!!!

Sweet corn in great shape

Well, Google decided to change it's format and quite frankly teaching an old dog isn't exactly my idea of fun but I guess one cannot stop progress....if that's what they call it!  I guess after 12 years of using the old system it was time to shake up things a bit, and shake them up they did!!  So forgive me if this is late or looks a little odd, I am only human!  So as I struggle to even get this picture where it supposed to be, let me tell you it's been hot.  Along with timely rains, my corn is literally reaching for the sky. The first three rows were planted  right after the fishing opener with the next 3 rows a few weeks later on June 1st.  This is done so it all doesn't ripen at the same time which then brings a mad scramble to get it packed away.  When it is about a foot high each row gets a side dressing of 46-0-0 fertilizer which is 46% nitrogen per 100 pounds of fertilizer and nothing else.  Corn loves nitrogen and as you see in the picture it has done extremely well.  Probably 6 - 7 feet tall, the leaves are a beautiful dark green, and the ears are forming very nicely.  Of course it along with the cucumbers thrive in this weather.  Personally I could use it a little cooler but it is what it is!  A few past posts have explained my method of preserving the corn for all year, using my dad's recipe, boil the corn for 3 minutes, remove from the water to stop the cooking.  Using an electric knife, cut off the kernels,  adding nothing, simply put the corn in the vacuum sealer bags, seal and freeze.  The corn tastes just like the day one packed it, absolutely delicious.  Along with the corn, the cucumbers have really been keeping me busy.  The Zucchini has been growing like crazy as well as the peppers and tomatoes.  Foolish me, have been bragging that the potatoes were free of potato bugs but alas, it's a daily job to pick them off now.  Should have kept my mouth shut!

Nice smallie on Monday

So back to fishing.  A couple of things.  Last Sunday we went down to Lake City to celebrate my grand niece's birthday with he parents.  We had a fabulous lunch at the Lake House on Pepin.  In preparing the trip it was asked of me to bring down my boat and the 7 of us could go for a ride.  the winds were scheduled to be 20 mphout of the northwest, no the perfect scenario for calm day on the water, never the less the boat was in tow.  The lake didn't look too bad howevee once on the water a number of issues became apparent.  Even though the boat has a 250 hp motor, it is not propped for that load and we could never get on plane in the rough water, and when we attempted all the boat would do is porpoise.  Even under the best throttle/weight distribution combinations, it wasn't good as a lot of the passengers were uncomfortable.  Oh well, it wasn't my idea!  Last night (Monday) my good friend Mike Grant's son David called to see if I wanted to go out.  Well of course!  Brandon had just welded the guides onto the trailer, the winch was replaced with something heavier duty and with some modifications, should make winching the boat up the trailer much easier.  With the water level up about 18 inched we headed up river all the way to Elk River. There were some great looking places to fish but no luck.  Spending more time than planned we motored back down to our normal starting point and fished the shorelines.  Still nothing as I figured the higher water would have pushed the fish shallower.  After the "milk run" drift" it was time to start the motor and hesd down to a few holes and catfish.  Well the motor started, then stuttered before stopping completely.  It would not start again as it seemed to be out of gas.  The tank still had a couple of gallons but something didn't feel right.  Reading the manual it said if you run it out of gas, the fuel system needs to be purged.  No where in the manual does it say how to do this!!!  We were 3 miles from Blair's landing and with a 2.5 mph drift, we'd get there a little after sunset.  The disadvantage is the electric will not push against the current so if you are snagged you are out of luck.  We each lost a nice crankbait.  Like a couple of weeks ago we did find some fish just off shore including this nice 17 inch smallie that hit my new Rapala BX Big Brat square bill crankbait.  It casts like a dream and goes over the rocks very well.  Dave missed a few and we both caught each about an 8 inch northern pike.  Arriving at the landing both the welded on guides and the winch worked beautifully.  Dave headed home while I looked at the motor, added gas to the tank and discovered a valve stem device on the inputs to the intake manifold.  Pumping the bulb then pressing the valve, air and gas came out.  A quick press on the starter button and she popped right off.  There needs to be a little research to make sure it is the proper method as I'd hate to be downstream the next time it decides to do that!  One last thing, my Sirius Radio hasn't been working on the big boat.  It was updated prior to fishing opener however it was giving me grief then.  A quick review of the last update in May states....Fixes Sirius/Weather issues.   It's pretty easy to upgrade the software, pulled it out so the antenna had a clear view of the sky and now it works perfectly.  Dang computers!!!  It will probably take a few posts to get everything back to normal, or at least my normal.........which is probably questionable anyway.

 

July Continues!

New Trailer Brake Actuator

It's been an interesting summer for sure.  The good news is that the garden is growing like crazy,  With the right amount of proper fertilizer, warm muggy days and warm nights, along with timely rains, the first planting of corn is tasseled out, the cucumbers are producing like crazy and the potatoes look fabulous.  I did speak too soon on the potato bugs as I am seeing a few these days.  As most of you know my boat has been a curse these last 12 months.  After getting the live well valve replaced and backing it into the shed the next morning there was a puddle of brake fluid under the surge brake actuator by the hitch.  Pulling the plug where one checks and fills the brake fluid, it was completely empty.  After filling it up again and letting it sit a few days, nothing leaked out but still there was something wrong.  My estimates on the trailer is it probably has 30,000 to 40,000 miles on it.  Last fall it got 4 new tires, a new axle, it isn't worth the chance to mess with the brakes.  Looking online an original OEM Dexter actuator replacement was about $350 by the time you add shipping and taxes.  Last fall when I needed an axle I was given Kremer Services as the "official" RangerTrail service center.  I called them and it wouldn't be till the end of July before they could order one and get me in.  the service guy was going to call me back but never did.  Last Thursday there was a "MEGA" fishing garage sale in Lindstrom, MN, near Frankie's.  Deciding to go it would also gave me the opportunity to stop and discuss my new problem.  The sale was a complete dud although I did buy 7 pairs of Green Bay Packer socks for $20, but that was about it.  Stopping at Frankie's, Deb was behind the counter as I told her my boat is lonely already for your shop!  Discussing the latest issue she said, yes we do these all the time, in fact I have the actuators in stock.   Well put my name on one and I'll be back on Monday.  She promised me they would put it in while I waited.  On Monday the boat was dropped off and instead of waiting around it was a great opportunity to drive to Burnett Creamery just east of Grantsburg, Wisconsin about 35 minutes away.  Uffda, their cheese curds were out of this world.  Freshly bagged from the morning they were still warm, squeaked like crazy, and had the best flavor of any curds.  Ended up with 4 bags of curds, some 14 year old cheddar, and 4 rounds of 3 pepper Colby cheese, incredible.   Next stop was to cross country it to Cumberland Wisconsin and stop at Louie's Finer Meats for their amazing homemade bratwursts.  Got 3 flavors, Packer Brats which has sauerkraut and cheese in them, Pickle and Cheese, and plain Beer Brats.  Before getting to Louie's, Jared from Frankie's called and said the trailer is done.  Incredibly the charges on fixing the trailer were $410, a heck of a deal considering it was done right and I wouldn't have to find a guy who knew what they were doing to bleed the brakes.  As well it was very noticeable once pulling, it's possible that the brakes had been going bad for a while.  Well now they are fixed.  I ended up giving some cheese to Deb as she asked if I would pick up some of that 3 pepper stuff.

Bill's 18 inch Smallie

Last Wednesday Bill Lundeen was in town, as mentioned in the last post.  He said he'd like to go fishing and thought a river trip would be nice so he showed up at noon, we loaded the Jon boat on the UTV and headed to the river.  Admittedly my routine is pretty much the same, run up about 4 miles then fish the north side of the river with crankbaits while drifting down.  As stated, the water temperature is quite high and usually my river fishing is done in August but I am surprised at the few smallmouth we have been catching.  Finally Bill hooks into a nice one, we were probably double the distance from the shore as we usually are, maybe this is trying to tell us something!  Never the less this was an interesting experience for Bill, one that was all my pleasure.  One of the best places to fish is where the shoreline rocks meet deeper water and the fish hang in the small areas of calmer water next to the main current, this hasn't been very productive either.  It's a fast paced fishing experience as one is drifting with the current about 2 to 2.5 mph, so everything is fast.  It was nice that Bill caught the first fish and the way it was going, maybe the last fish.  After passing the good areas we anchored just downstream from Cloquet Island to fish with worms but nothing was biting.  Giving it 20 minutes we moved downstream to another deeper eddy and anchored.  After about 15 minutes something hit my bait but after lifting the rod and feeling nothing I set it down.  Another tap tap, another lifting the rod, another nothing.  Deciding to reel it in to check the bait, the hook finally connected with a nice smallmouth bass.  Apparently the fish had the bait and was swimming upstream with it making it virtually impossible to detect.  After deciding to reel in the circle hook did it's job and fish on!!!  It's an interesting way to catch a fish but it works.  Once again zero rough fish caught, not even a catfish.  I am getting to think that the real trick is to get up into the shallow areas where the fish come up to feed, like off of John's dock.  Checking it out it's only about 3 feet but Jake and myself's best day was there.  You would think the deeper holes would hold more fish but that seems not to be the case.

Second Smallie on a bottom crawler rig

After fishing with Bill I noticed that the ceramic inside ring of one guide was missing.  Thorne Brothers fixes these so on my way back from the garage sale last week a detour on Central Ave to Thorne's I dropped of the rod.  This Monday when returning from Frankie's they called to say my rod was done.  Another detour and picked up the rod, a Fenwick HMX casting rod, not an overly expensive rod but worth fixing for sure.  The guide was a single foot guide, small diameter and quite honestly it's almost impossible to even tell which guide they had fixed.  The workmanship is excellent, and it was even a matching guide.  The next thing was the price, only $12.  I felt so guilty I had to buy a bait!  Nice job and highly recommend them for rod repair.  The other thing happening is fixing up the river boat.  When out with Bill it was very difficult loading the boat on the trailer.  When I got the boat my brother-in-law had side guides mounted but they were not very good and the brackets became more of a problem than what they were worth, so they got removed.  Fast forward, this spring the thought was to weld a plate to the trailer then using better u bolts, that would be more secure.  Neighbor Brandon volunteered to weld the trailer, so we did it last Thursday night.  After looking at it we decided to weld the side guides directly on the trailer, using some angle iron to brace it.   They look pretty good and now will stand up to getting the boat straight on the trailer better. At the same time the winch didn't function well.  Brandon was going to fix the front roller stop however decided to simply move the winch down.  This worked but the winch handle was still too long and hit the boat on that last turn.  Ordering a new winch from Amazon, one with a strap, it needed modifying in the form of a new mounting hole on the trailer as well, decided to shorten the winch handle as it was also to long.  This is sort of a pain but a few trips to the hardware store and getting out the seldom used drill press, it is a work of art! The next thing is mounting some navigation lights which are done and just needs to be hooked up.  New guides, winch, lights, now all we need is the fish to cooperate better as I'd hate to say fishing off of John's dock is more productive!

Hot, Hot, Hot!!!

Great picture of Toolman!!

It's been almost too hot to write!!  Great excuse but our weather has been hot and muggy for the last week, admittedly the garden likes it but then again, that's more work.....uffda! So we finally got to say goodbye to our good friend and neighbor "Toolman" Tim Kuntz.  Back on April 6th I mentioned Tim in that week's post.  He was diagnosed with cancer on February 2nd and passed away just 8 short weeks later.  On Monday June 29th, Tim's official funeral was at his home church, Sacred Heart in East Grand Forks, MN.  With all this Covid restrictions, this was the first opportunity to have a meaningful service.  While Pete, Bots and their wives went up the night before and stayed in town, my wife Lyn and I decided to drive to Alexandria and stay with Lory and Lynn Brasel at their cabin on Lake Ida.  We spent a quiet evening making steaks and enjoying the view of the lake before getting up early and driving the 2 1/2 hours to East Grand Forks.  The funeral really helped give some closure to the unfortunate passing of our good friend Tim.  Pete, Tim's niece and myself got up and said a few words about Tim, it was the first time for Pete but that was good for him and he did a great job.  It's never fun to attend these things however it gives one some perspective on how important your friends are in your life as well, things change and not always for the better. We all benefit from these friends whether they be one's that you have known all your life, like my buddy Kevin, or you have only know them later in life, like Tim.  Good friends are hard to come by so make sure you treat them well and with respect because after they have left, the only thing you have is whether or not you are a better person for knowing them.  In Tim's case it is a resounding yes, I still drive by his place looking to see if he's in the garage.  Old habits are hard to break for sure but I suspect somewhere he is watching me probably giving me hell for thinking he's home.

Ben's new 620FS

So after the last outing on Mille Lacs with my friends Jack and Pete, there were some boat issues that needed to be cleaned up.  In the meantime Ben Aiona was on the hunt for a boat like mine.  Ben fishes big water a lot and wanted a larger boat.  His current boat was a Ranger 618T with a 90 hp tiller, nice boat but a little small for Erie, Lake Michigan, and Devil's Lake.  Talking to the dealer in Chippewa Falls at a new Ranger 620FS like mine, he asked me what I thought he could get for his boat, a 2016 model.  Oh, I don't know, maybe $36,000.  Well Ben doesn't screw around and put it on Walleye Central for a lot more than that and in 24 hours it was sold!  Well he was boat less, and waiting for the one he was negotiating on to come in.  While making an appointment with Frankie's I spoke to Todd, the sales guy about a 620FS, he said at 9:00 he just unloaded one from the truck.  Getting a price then calling Ben, he was on his way up to see the boat in Chippewa as he would prefer dealing with a local dealer.  Never the less he was intrigued by the price as Frankie is one of the largest volume Ranger dealers in the country.  Ben went to look at the boat and after talking to him he said that the boat he looked at was butt ugly, no sparkles, just plain gelcoat, and he was heading up to Frankie's to look at what he had.  Deciding to meet him there and arriving earlier, they moved the boat into the show room, it was gorgeous.  Knowing Ben and this boat, I predicted that this boat will be gone in an hour.  Well sure enough Ben left with a new Ranger purchase agreement and here is a picture, it is a beautiful boat as well it has a lot of nice options as it is their Ranger Cup package.  He picked it up on Friday June 26th and drove to Chetek to do an initial run, ran down to the Mississippi river where this picture was taken, them last week was on Lake Michigan catching lake trout and salmon.  Ben has the energy to really make this boat work for him.  His dad, Kevin and I used to fish Lake Michigan with Gary Barneson, I had some down riggers from 30 years ago that were better than what Ben had so Kevin and Gary were on their way back from Devil's Lake, we met at Cabela's and I gave him the down riggers we used and some other stuff that has just been laying around. Heck if I want to go to Lake Michigan, I'll just go with Ben!

Always a nice sunset on the river.

With the hot weather and Mille Lacs being completely closed to walleye fishing for the month of July, the best alternative has been the Mississippi River behind the house.  Having been in my river boat, last night neighbor Tom joined me as we launched at Blair's and headed up stream to cast the shorelines.  The water temperature was 88 degrees, pretty hot for this time of year.  Tom is a good fisherman and between the two of use we didn't get one smallmouth bass, and after anchoring for an hour didn't even get one fish on our bottom rigs loaded with nightcrawlers.  Usually that's a deadly method of getting at least a carp, redhorse, or catfish.  Admittedly it was the first time getting skunked on the river.  After "catching" this nice sunset picture we headed back to the pole shed.  A couple of notes, earlier stopping at Vado's Live Bait in Spring Lake Park, MN (10 miles from home) I picked up 6 dozen of the fattest nightcrawlers I had ever seen.  It mystifies me as to why we didn't catch any fish on these as it was like presenting a Fillet Mignon to them, although we did get some small hits, it was nothing substantial.  I am not sure what the problem has been however this is the earliest that I have fished the river so maybe it's just me!  Anyway it was a nice relaxing time to spend on the water.  My friend Bill Lundeen is threatening me that he will be down the middle of this week, maybe I can get him to show me what I am doing wrong!

Still waiting for word as to if and when Canada will open.  Bruce is determined to go somewhere, maybe we'll fly to Lake of the Woods or Devil's Lake and hire a guide for the day.  Time will tell as summer is moving fast!

Back Fishing!

Jake's nice 20 inch channel Catfish, no turtle pictures!

Making up for lost time the last week saw 3 fishing adventures, 2 on the Mississippi River and yesterday was a day on Mille Lacs before it closes to walleye fishing on July 1st for a month. Starting with last Wednesday night, originally I had a trip planned to Mille Lacs but with the 96 degree temperatures and 35 MPH winds, it was better to stay on shore.  Here is my Facebook post regarding the night's adventure: "So last night I spent a couple of hours drowning some nightcrawlers off of John Meyer's dock. Accompanying me was my little fishing friend, Jake Hanson, Limo's boy, and is always the gracious and enthusiastic guest. While I got set up with our circle hooks and sinkers I tied onto Jake's line a new prop frog bait, a great selection for smallies and virtually snagless. After casting out the crawler rigs, John has nothing to hold the rods, I weaved them into our lawn chairs and waited. Before long Jake's pole was heading towards the river taking the lawn chair with it. A desperate grab saved both the rod, the chair, and the fish was on. Yelling for Jake to get up here he grabbed the pole and soon about a 15# carp emerged. Forgetting to bring a net the fish eventually tangled around the dock and snapped the line. Within 5 minutes the other rod was headed towards the river, again Jake ran up to grab the pole and it was another huge carp. Plan B didn't work so good either as the hook came out. Deciding there was more action on the dock, Jake decided to stay and within 5 minutes again another ferocious hit. After setting the hook Jake stated this fish feels different, it was....we had hooked a huge soft shelled turtle and it wasn't very happy! Hoping to get a picture with Jake, using a pliers I unhooked it, it wasn't having any thoughts of cooperating and lunged at us. I didn't think a 65 year old guy could move as fast as a young teenager as I provided the evenings entertainment. As the sun set I assured Jake this was prime catfish time and before long we had a double, a nice 20 incher and a 16 incher. Teaching Jake how to hold a catfish without getting stung, he did pretty well, so we finally got our evenings picture. Jake's a pretty good fisherman and a lot of fun to be with. It reminds me when I was his age fishing catfish on the Buffalo river with my dad's friends. I told Jake, in 50 years you'll be telling the story of fishing with your dad's old friend when we caught this turtle! Thanks John for the use of the dock and helping to create some great memories for a young man that truly appreciates the experience regardless of the generation gap." Fishing with Jake is a lot of fun as it reminds me when I was young and fishing with Kevin, and that's a long time ago!  He is eager to learn and pays close attention to my advice, which is hard to find these days and is great for my ego....we both get a lot of enjoyment hanging with each other!!!

Dave's Personal best Smallmouth bass.

The second trip of the week was on Saturday with another young man, David Grant, the son of agood friend of mine, he just graduated from High school..  He loves fishing and has been with me a number of times.  Last week we went to the fishing garage sale together and bought some stuff that one always needs!  Determined to get the jon boat out of the shed and running, this became the excuse to get it done.  Dave showed up at about 5:00 in the afternoon, having a few things left we hooked the boat up to the Polaris Razor and headed for the neighbors boat landing.  knowing my luck we decided to start the motor while at the shed, just in case!  It started as though it was yesterday it last ran, rather than last September.  EFI and electric start, what a great combination!  After repairing my neighbors gate we got the boat in the river and headed upstream for about 4 miles.  It is surprising how low the water is for this time of year.  Hitting the bottom a couple of times it is nice that the motor has a rock guard on it, although it slows the speed by a mph or so, it absorbs all the damage.  Both Dave and I are partial to square bill crankbaits as they seem to not get as hung up on the bottom as other types, we both started casting our favorite colors as the long drift began.  Of course it is important to show the kid some leadership I caught the first smallie, a 15 inch fish.  Admittedly this was the earliest I have ever fished the river but with the water level down, maybe it would be great.  Soon we entered a stretch where there is a lot of rip rap along the shore line, meant to keep the erosion down but also it is prime habitat for smallmouth.  Giving Dave some tips on where to cast, a very nice fish hit his lure and we scrambled to get the boat away from the shore.  Finally netting it, a nice 19 inch bass, Dave's personal best smallie, we snapped a couple of pictures before releasing it.  We caught a few more fish including another smallmouth caught on a bottom rig using nightcrawlers, a total surprise.  It certainly wasn't our best trip fish wise however as with Jake, most of the fun is being with these bright young men and trying to teach them something.  Telling Dave he needs to try this again, this time maybe spend some more time trying to find some walleyes as they are in the river.  Notice Dave's hat, an American flag however the red strips are actually fish silhouettes, it's really interesting.  Well on Sunday a package arrived with that hat inside, thank's Dave, now we both can look swanky!

27" walleye, largest of the day!

The third trip of this week was with a couple of friends, Jack Taylor and Pete.  Pete had gotten some red-tail minnows as the reports were the walleyes were hungry on Mille Lacs.  We had cancelled 2 earlier trips because of the weather and Tuesday looked good so we decided to take the Ranger out.  Stopping at Prince's bait we picked up leeches and crawlers, along with the red-tails we were set.  Launching on the west side of the lake, it was a bit rougher than we expected.  The temperature was very nice and our first stop was the mid lake gravel bars, about 5 miles or so out.  We hit the first bar which had another boat on it so we decided to stop at the next one a half mile north.  Jack put a leech on, Pete did a red-tail and I rigged a crawler harness.  Not more than 5 minutes of dragging and a nice walleye hit my crawler.  We continued to have a steady bite alternating between my crawler, Jack's leech's and Pete's minnow.  After about 10 walleyes we decided to hit the first gravel bar that we stopped at as the boat that was originally there had left.  With a fairly string north wind we drifted at the perfect speed of about 1 mph.  It was perfect drifting weather and we caught another 16 for a total of 26 walleyes for the day.  Having never used a red-tail for walleyes I changed my rig and hooked on a big one.   Letting the line down to the bottom, after about 3 minutes the rod told me there was something going on below.  Lifting to see if I could feel the bite there was nothing.  Again there was a tap tap then nothing.  After a few minutes of this I began to reel in the line, it was obvious that the line was not behind where it should have been and ahead of it's normal position.  As the reel cranked the line in all of a sudden there was a very heavy fish on the line.  Apparently the fish had grabbed the minnow and swam towards the boat which negated any traditional feel of a bite.  Netting the walleye it was the largest of the day, 27 inches.  Many of our fish were long but skinny, this fish was fat and healthy.  Back in the water it went as we saw a storm approaching from the north.  Deciding we had enough we barely made it to the landing when the sky unloaded on us.  Luckily we had time to get the boat on the trailer and the cover on before the bulk of the rain came.  It was another successful trip, plenty of walleyes were caught however one cannot keep any walleyes from Mille Lacs this year and to add insult to injury, the month of July walleye fishing is not allowed.....period!  Based on the great fishing in June it would not surprise anyone that it will shut down for the year.  As always I'll keep my political comments to myself!

Next trip will be on the river or maybe sneak back up to Mille Lacs before July 1st.  Monday is the funeral of our good friend Tim who passed away from cancer on April 3rd.  Even though there should have been 2 trips to Lac Seul this year, the current situation has us thinking about flying somewhere with Bruce to try a new fishing experience.  More on that later!

Positive Changes are Happening!

Another Mole!

What a difference a week can make.  Thursday Frankie's called and said the boat is ready!!  I am not sure if the boat likes being at Frankie's more than at home as in the last 12 months it has spent at least 5 of them in the shop.  The fiberglass guy does a good job and it looks like new.  As long as they had the lower unit off it was prudent to change the water pump.  It still looked pretty good but I agree with that philosophy as it seemed like a great idea.  I wasn't too impressed by the repair job on the front of the skeg, I guess my idea of a repair falls more in line with the fiberglass guy, it should look like new.  You have to look close at the skeg repair and because the "trim Tab" is built into the skeg design, it probably is a hard one to duplicate however...........and I'll just leave it at that! My friend Bruce understands the dilemma, you know it isn't right, bugs the crap out of you, but what's a reasonable answer for the repair, another month of no use?  Sometimes common sense has to dictate until there is a convenient time to address the issue that unfortunately only bugs you!  Upon getting her home and checking things out, the live well still had water in it and the valve control was on empty.  I thought...........I'll bet they forgot to remove the whiskey bottle cork that I inserted in the live well input at the rear of the boat, to stop water from leaking in (and would stop water from draining out).  Sure enough, after pulling the screen it was still in there.  Although it took a channel lock to pull it out we are back to normal.  She's washed and waxed, windshield cleaned, and the electronic's software has been updated.  The grab pole for the Ezee Steps, the system for us old guys to get into the boat easier, was rusting on the mount.  Being held by 4 1 inch 1/4" bolts, after removing and wire brushing the rusted areas it was repainted with truck bed liner spray (matches the Armor Coat on the trailer) then remounted with new stainless steel bolts.  It looks pretty good, at least better than seeing rust as one enters the boat.  Last week was posted a picture of a mole that I got on the first try.  Since then these seemingly dumb creatures have done their best to outwit me.  My friend Paul Wenaas responded to my post with a fool

The Cat Earning it's Keep!

proof mole trap that I needed to get, Fleet Farm had them for only $22.00, but after three unsuccessful tries I set only 1 trap again then headed to Fleet Farm to act on his suggestion.  Upon returning to set my new trap, damn if there wasn't a mole caught in my 4th set of this tunnel.  With the dry weather upon us, the moles will head to my irrigated lawn so all is not lost.  He says this trap works pretty good, I hope so as now my collection includes a 5th style.  Oh well, if they were pocket gophers it would be a different story.  It would be really nice if somehow our cat could figure out how to catch those dang moles.  He's actually pretty good at the above ground rodents and is quite successful in keeping the mouse, vole, and stripped gopher populations in check around the house.  It is quite amazing how quick our cat, Rocky can be however  I've seen those ground squirrels out run him but he's pretty savoy when it comes to mice.  Here he is pictured with a field mouse he got in the perennial garden earlier.  It's also amazing to watch as he seldom plays with them once caught, rather simply sit's down and within a minute has devoured everything but it's guts.  As stated earlier, if we could teach him to get moles!

Shimano Stradic CI4, 2500 Series

Thursday was the annual Fishing Garage Sale which usually has taken place down the road in Champlin.  At a previous sale, I signed the registration book with my e-mail and this year it was held east of Buffalo, MN, about 15 miles away.  Calling my friend David Grant we headed out there by 9:00 and it was pretty good.  As any good fisherman knows, one never has enough fishing rods and there was a nice selection of 13 Fishing and Fenwick rods, all at about 50 - 60% off of standard retail.  I ended up with a couple of 13 Fishing, 1 Muse which is a very nice 6'10" medium light/fast action spinning rod which is extremely light and 1 lime green Fate, another 6'10" medium light/fast action rod, not as light as the Muse but the color is pretty cool!  On the way home we stopped at Cabela's as in their Father's Day flyer was Shimano Stratic CI4's for $80 off, normally $229.00 for only $149.00.  These reels are premium reels which are incredibly light and come in at 6.7 ounces.  They are extremely smooth and a pleasure to fish with, especially paired with a nice lighter rod like the Muse,  one can fish all day jigging without any fatigue, which is important at my age.  My Canada buddies laugh at me, what if it goes in..........my Ugly Stick or Snoopy Rod is just fine and I am only out $30!  Well I try to be a little more careful although admittedly I wish that were the same for my boat!  The problem was that on Thursday Cabela's only had 1 series 4000 left, too big for walleye fishing, although this is what's on my Alaskan Salmon rods.  The guys says come back tomorrow, we will have more but get here early.  Like a good sheep I was in line Friday morning by 8:45 and the doors opened at 9:00.  At the reel counter there were 15 guys listening to the man behind the counter stating that there were no reels.  After a few choice words were exchanged, the guys said he didn't know when more would be in but they could come any day.  Repeating the routine on Saturday morning they had gotten in the 2500 series only.  Although I wanted the 3000 series the only reel difference is the 3000 has a slightly larger spool however the body and weight are the same as the 2500.  They say a bird in the hand is better than 2 in the bush........I took a couple.  It looks good on the Muse and ready to go for our trip to Mille Lacs on Wednesday.

Still In The Shop

First mole of the year!

I am beginning to believe that my boat loves my dealer Frankie more than it loves me.  Of course there is a probable good reason for this, in my possession it takes it's own fate in my hands yet at Frankie's, it gets the tender loving care it really needs!  If I look at the total time it has been in the shop between May 20, 2019 to May 20, 2020, it was over 6 months!  Of course there is no one to blame except me so that leaves me tip toeing around my fishing adventures.  Of course add the current Covid situation in there and I should be on Lac Seul right now on my second trip of the year.  In the meantime I simply sit around and try to get things done.  So rather than sitting around and feeling bad about the boat not being in my possession therefore not being able to fish Devils Lake this weekend with Kevin and Ben, there were a couple of interesting moments to share.  The first is last Thursday Bruce Wiley called me to ask if I wanted to have lunch.  About 50% of the time lunch means more than just meeting him at a restaurant rather meeting him at his hanger and we fly somewhere for lunch.  The first option was Hanger 54 in the Eau Claire Airport, a quick call stated they were still closed.  Plan B was fly to Voyager Village, southwest of Danbury, Wisconsin, a large development with a golf course, clubhouse, runway, that is secluded in the middle of the woods/lake area.  A quick 35 minute flight in Bruce's Cessna 182 RG (Retractable Gear), as we approached Siren Wisconsin I saw a runway and asked about it, "nope, you need to be right on top of this one to see it" and of course he was right.  We landed basically on the golf course, hoping the guys teeing off to our right wouldn't slice one as we touched down.  Luckily we were good as we taxied our way to the plane parking area, threw $20 in the runway donation box and walked to the clubhouse and had a magnificent lunch, quite an operation.  Sat next to some retired business guys from the St. Paul area and had a good discussion of the current situations.  As we took off I was looking for my phone to take some pictures, no phone!!!  Damn, did it fall out of my pocket, did I leave it on the table....I seem to be getting worse at just set it it down and forgetting.  Well, not remembering that it was used, the last time was at the hanger, it must be there.  We landed back at Crystal Airport and made our way back to the hanger, Bruce exclaimed, "Is that your phone on the Taxi way?  Uffda it was, apparently falling out of my pocket when I entered the plane 3 hours earlier.......it was still there!  Undamaged somehow there has to be a better way of my hanging onto my phone!  So no pictures of the trip but I have been working hard on trapping a mole that is making tunnels in the yard.  These creatures are difficult to trap and finally getting one, I figured I solved that problem yet the tunnel was remade the following day.  Hopefully success will find me again, but it is a challenge for sure!

Jared's 28 inch Walleye in the Trees

At this time I am expecting a call to pick up the boat either today or tomorrow.  The river is down so I have been trying to get the jon boat ready for the river.  The contingency plan is to fish off the dock of my friend John Meyer, down the street.  He has been great to allow some of us to simply drive down and fish off his dock for catfish, carp, suckers, walleye, and whatever feels like biting.  In the meantime Ben Aiona has been texting me pictures of their success on Devils Lake, North Dakota.  His son Jared is quite a fisherman and does not hesitate to get right in the action.  Apparently they arrived last Tuesday afternoon, went out and caught over 116 stripped bass in a few hours.  That is a lot of fun.  Here is a picture of Jared's 28 inch walleye caught on a leech and bobber in the trees, you can see them sticking out of the water. Ben was having some difficulties with his HDS 12 Gen 3 however it was resolved and he didn't need mine.  With 2 trips to Lac Seul cancelled, Bruce was talking about going somewhere, Ben suggested Devil's Lake as he would be happy to guide us!  that might be a great idea and we are kicking it around.  In the meantime my garden is coming along well.  Today it will be in the 90's and everything will be growing like crazy, including the weeds!  The asparagus is doing well, and we decided to try and freeze some rhubarb this year and it went pretty well.  After picking and washing, it was cut up into cubes and put in a shallow aluminum pan, then put in the freezer for 30 minutes or so.  Frozen solid, then we vacuum packed it, 4 cups to the pouch and voila, we'll have to see how it turns out in a few months.  It looks pretty good though. 

My goal for this week is pretty simple, get my Ranger back, clean out the jon boat, the annual fishing garage sale that is held in Champlin every year has been moved to Buffalo, MN this year so on Thursday morning I hope to be there as they have some pretty sweet deals.  Hopefully it all ends with a trip to Mille Lacs to fish the flats for walleye before it closes on July 1st, which is a whole new story in itself.